Version 3.0
Date revised: 4/26/2019

SAFETY DATA SHEETNational Diagnostics

Conforms to regulation (EC) no. EU 453/2010

SECTION 1 - IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

1.1 Product Identifier

Product Name: SSPE (20X) Product Number: EC-910

1.2 Relevant Identified Uses of the Substance/Mixture and Uses Advised Against

Investigational research by professional users

1.3 Details of the Supplier of the Safety Data Sheet

Manufacturer
National Diagnostics
305 Patton Drive
Atlanta, GA 30036
(404) 699-2121
(800) 526-3867
info@nationaldiagnostics.com

1.4 Emergency Telephone Number

ChemTel Inc.
Contract number MIS8894340
1-800 255-3924 (United States, Canada, Puerto Rico & US Virgin Islands)
01-800-099-0731 (Mexico)
400-120-0751 (China)
000-800-100-4086 (India)
1-300-954-583 (Australia)
0-800-591-6042 (Brazil)
+1-813-255-3924 (All other regions)

SECTION 2 - HAZARDS IDENTIFICATION

2.1 Classification of the Substance or Mixture

Not a hazardous substance or mixture according to regulation (EC) No. 1272/2008.

2.2 Label Elements

This product has no labeling elements associated with EC directives or respective national laws.

2.3 Other Hazards

None found.

SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS

3.2 Mixture

Chemical Names/Description

Buffered saline solution


Component List

Component % Comp. CAS # EC # 1278/2008 Classification
Sodium Phosphate2.76 7558-79-4  231-448-7 N.A.
Sodium Chloride17.53 7647-14-5  231-598-3 N.A.


SECTION 4 - FIRST AID MEASURES

4.1 Description of First Aid Measures

Inhalation

Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.

Ingestion

Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Call a physician.

Skin

Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eyes

Immediately flush eyes with plenty of water for at least fifteen minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

4.2 Most Important Symptoms and Effects, Both Acute and Delayed

Inhalation

Sodium Phosphate:

Not expected to be a health hazard by inhalation.

Sodium Chloride:

No information found.

Ingestion

Sodium Phosphate:

No data found.

Sodium Chloride:

No information found.

Skin

Sodium Phosphate:

No adverse effects expected

Sodium Chloride:

No information found.

Eyes

Sodium Phosphate:

Pain and redness

Sodium Chloride:

No information found.

4.3 Indication of Any Immediate Medical Attention and Special Treatment Needed

Unknown/not applicable

SECTION 5 - FIRE FIGHTING MEASURES

5.1 Extinguishing media

Use media appropriate to the primary cause of fire.

5.2 Special Hazards Arising from the Substance/Mixture

Hazardous Combustion Products

Thermal decomposition products may include toxic oxides of nitrogen, carbon and phosphors.

Hazardous Decomposition Products

Upon heating, may produce ammonia, nitrogen oxides, cyanuric acid, cyanic acid, biuret, carbon dioxide, carbon monoxide, and hydrogen.

Hazardous Polymerization

Will not occur under normal conditions of use and storage.

5.3 Advice for Firefighters

In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.

5.4 Further Information

No data available.

SECTION 6 - ACCIDENTAL RELEASE MEASURES

6.1 Personal Precautions

If water solvent has evaporated, wear NIOSH approved air-purifying respirator.

6.2 Environmental Precautions

Prevent discharge into the environment. Dike spills and stop leakage where practical. Do not allow material to enter drains.

6.3 Methods and Materials for Containment and Cleaning Up

Contain and clean up spill immediately, prevent from entering floor drains. Contain liquids using absorbents. Shovel all spill materials into disposal drum. Scrub spill area with detergent, flush with copious amounts of water.

6.4 References to Other Sections

For disposal information see Section 13. For protective clothing and equipment see Section 8.

SECTION 7 - HANDLING AND STORAGE

7.1 Precautions for Safe Handling

Avoid contact and inhalation. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling. Wear special protective equipment (Sec. 8) where exposures may exceed established levels.

7.2 Conditions for Safe Storage (including any incompatibles)

Keep in a tightly closed container, stored in a cooled, dry, ventilated area. Protect from physical damage. Isolate from incompatible materials (section 10).

Incompatibles

Sodium Phosphate:

Acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and pyrogallol.

Sodium Chloride:

No incompatibility data found.

7.3 Specific End Uses

Investigational research by professional users

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PRECAUTIONS

8.1 Control Parameters

Component: Sodium Phosphate

ACGIH Threshold Limit Value (TLV):

None established

OSHA Permissable Exposure Limit (PEL):

None established

Component: Sodium Chloride

ACGIH Threshold Limit Value (TLV):

none established

OSHA Permissable Exposure Limit (PEL):

None established

8.2 Exposure Controls

Engineering Controls

A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source.

Respiratory Protection

If exposure limits are exceeded, wear a full-face respirator with organic vapor cartridge and high efficiency dust mist filter. Beyond fifty times exposure limits or when exposure levels are not known, wear a full-face piece positive pressure respirator.

Eye Protection

Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.

Skin Protection

Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.


SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on Basic Physical & Chemical Properties

a. AppearanceClear, colorless solutionb. OdorNone
c. Odor ThresholdN.A.d. pHNeutral
e. Melting/Freezing Point (oC)0f. Boiling point (oC)104.4
g. Flash Point (oC)N.A.h. Evaporation Rate1.0
i. FlammabilityN.A.j. Upper/Lower Flammability or Explosive LimitsN.A.
k. Vapor PressureWaterl. Vapor Density (Air = 1)N.A.
m. Relative Density1.15n. Water SolubilitySoluble
o. Partition Coefficient n-octanol/waterMixturep. Autoignition Temperature (oC)N.A.
q. Decomposition Temperature (oC)Not applicable.r. ViscosityNo data available.
s. Explosive PropertiesN.A.t. Oxidizing PropertiesNot an oxidizer

SECTION 10 - STABILITY AND REACTIVITY

10.1 Reactivity

Not reactive under normal conditions of use.

10.2 Chemical Stability

Stable under ordinary conditions of use and storage.

10.3 Possibility of Hazardous Reactions

Will not occur under normal conditions of use and storage.

10.4 Conditions to Avoid

Incompatibles.

10.5 Incompatible Materials

Sodium Phosphate:

Acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and pyrogallol.

Sodium Chloride:

No incompatibility data found.

10.6 Hazardous Decomposition Products

Upon heating, may produce ammonia, nitrogen oxides, cyanuric acid, cyanic acid, biuret, carbon dioxide, carbon monoxide, and hydrogen.

SECTION 11 - TOXICOLOGICAL INFORMATION

Product LD50 Values

Oral Rat LD50 (mg/kg)

6255

Dermal Rabbit LD50 (mg/kg)

5362

Component Cancer List Status

 NTP Carcinogen 
 KnownAnticipatedIARC Category
Sodium PhosphateNoNoNone
Sodium ChlorideNoNoNone

Potential Health Effects

Inhalation

Sodium Phosphate

No data found.

Sodium Chloride

May cause respiratory tract irritation.

Ingestion

Sodium Phosphate

Phosphates are slowly and incompletely absorbed when ingested, and seldom result in systematic effects. Some adverse health effects have occurred. The toxicity of phosphates is because of their ability to sequester calcium.

Sodium Chloride

Ingestion of large amounts may cause gastrointestinal irritation. Ingestion of large amounts may cause nausea and vomiting, rigidity or convulsions. Continued exposure can produce a coma, dehydration and internal organ congestion.

Skin

Sodium Phosphate

No data available.

Sodium Chloride

May cause skin irritation.

Eyes

Sodium Phosphate

No data available

Sodium Chloride

May cause eye irritation.

Carcinogenicity

Sodium Phosphate

Not listed as a known or anticipated carcinogen by NTP or IARC.

Sodium Chloride

Not listed by ACGIH, IARC, NIOSH, NTP or OSHA.

Mutagenicity

Sodium Phosphate

No information found.

Sodium Chloride

See actual entry in RTECS for complete information.

Reproductive Toxicity

Sodium Phosphate

Sodium Chloride

No data available.

Teratogenic Effects

Sodium Phosphate

No information found.

Sodium Chloride

No information found.

Routes of Entry

Sodium Phosphate

No information found.

Sodium Chloride

No information found.

Target Organ Statement

Sodium Phosphate

No information found.

Sodium Chloride

No information found.

SECTION 12 - ECOLOGICAL INFOMATION

12.1 Toxicity

COMPONENT: Sodium Phosphate

 VertebratesInvertebratesAlgaeMicroorganisms
Aquatic Toxicity
(ppm unless otherwise noted)
LC50 (96hr, trout) >100mg/lLC50 (zebra mussel) 92mg/lEC50 > 100mg/lEC50 > 1000mg/l

 BirdsArthropodsPlantsMicroorganisms
Terrestrial Environment Toxicity
(ppm unless otherwise noted)
No dataNo dataNo dataNo data

COMPONENT: Sodium Chloride

 VertebratesInvertebratesAlgaeMicroorganisms
Aquatic Toxicity
(ppm unless otherwise noted)
LC50 (96hrs, bluegill) 5480 mg/LLC50 (48 hr, daphnia) 874mg/LLC50 (120hrs) 2430 mg/LNo data

 BirdsArthropodsPlantsMicroorganisms
Terrestrial Environment Toxicity
(ppm unless otherwise noted)
LD50 (house sparrow) 3500mg/kgNo dataIC50 (7 days) 500-1950mg/kg soilNo data

12.2 Persistence and Degradability

Sodium Phosphate

No data

Sodium Chloride

No data

12.3 Bioaccumulative Potential

Sodium Phosphate

No data

Sodium Chloride

No data

12.4 Mobility in Soil

Sodium Phosphate

No data

Sodium Chloride

No data

12.5 Results of PBT and vPvB Assessment

Sodium Phosphate

Mineral salt

Sodium Chloride

Not PBT or vPvB

12.6 Other Adverse Effects

Sodium Phosphate

None

Sodium Chloride

None


SECTION 13 - DISPOSAL CONSIDERATIONS

13.1 Waste Treatment Methods

Offer surplus or non-recyclable product to licensed disposal company. Disposal is subject to user compliance with applicable law and product characteristics at time of disposal. Dispose of packaging as product.


SECTION 14 - TRANSPORT INFORMATION

  ADR/RID IATA IMO DOT
14.1 UN Number N.A.N.A.N.A.N.A.
14.2 Shipping NameNot regulatedNot regulatedNot regulatedNot regulated
14.3 Hazard ClassN.A.N.A.N.A.N.A.
14.4 Packing GroupN.A.N.A.N.A.N.A.
14.5 Environmental HazardsN.A.N.A.Not regulatedN.A.
14.6 Special PrecautionsN.A.N.A.N.A.N.A.

SECTION 15 - REGULATORY INFORMATION

15.1 Safety, Health and Environmental Regulations/Legislation Specific for the Substance/Mixture

United States

TSCA Regulatory Statement

All intentional ingredients are listed on the TSCA Inventory.

SARA 311/312 Hazard Categories
ComponentFirePressureReactivityAcuteChronic
Sodium PhosphateNoNoNoNoNo
Sodium ChlorideNoNoNoYesNo

Europe

EEC Regulatory

All intentional ingredients are listed on the European EINECS Inventory.

SECTION 16 - OTHER INFORMATION

Revisional Updates

4/26/2019 - Updated Section 1.4
5/29/2015 - Updated Sections 2.1 and 3.2
1/27/2014 - Released Version 1.0

NFPA Codes

Health 0   Flammability 0  Reactivity 0

Dangers

Sodium Phosphate

None

Sodium Chloride

None

MANUFACTURER DISCLAIMER: The information given herein is offered in good faith as accurate, but without guarantee. Conditions of the use and suitability of the product for particular uses are beyond our control. All risks of use of the product are therefore assumed by the user. Nothing is intended as a recommendation for uses which infringe valid patents or as extending license under valid patents. Appropriate warnings and safe handling procedures should be provided to handlers and users.